An articulated process for a straightforward product – veneered skirting boards

 

One look at a skirting board and the finishing process it undergoes does not immediately come to mind, yet there is a lot to consider when defining an integrated finishing line for this product.

One of the many possible solutions serves simply as an example. Each customer we have dealt with has a slightly different objective, so we like to evaluate each case separately. Standard solutions never seem to give more than standard satisfaction, whereas we at Cefla Finishing want to be sure we exceed the customer’s expectations, so we conceive the solution carefully, adapting a feature to solve a problem or adding a function to deliver a better result.

Would you like to have more information?

Starting with a brushing machine, we would then move on through a linear spraying machine.The first coat will probably be UV polyacrylic and Performa will apply it at 100 g/sqm. A seven-minute flash off in a Cross Oven will then be needed, followed by a UV curing stage.

The top side of the profiles will then be sanded on the brushing machine, a topcoat will be applied on the Performa and the flash off repeated for 7 minutes in the Cross Oven.

Running at speeds between 3000 and nearly 5000 pieces/shift, this is just one approach to finishing veneered skirting boards.

Take a look at the equipment we have mentioned in the article

Performa

Performa is a linear spraying machine for painting mouldings and narrow boards. Available in 3 different configurations.

Discover Performa

CrossOven

The CrossOven transversal oven is ideal for flash-off and/or drying paints applied to mouldings and narrow boards.

Discover CrossOven

Products and Solutions

The search function is now available for complete production lines. All you need to do is select the material involved, the market sector or the finished product. Whichever search criteria is used, a corresponding solution for your spray coating line is obtained in just 3 steps. Search results will indicate the most suitable solution, based on the level of flexibility required, the productivity range and the overall footprint. Solutions are classified as small (S), medium (M) or large (L).

Set up your lines

ceflaLab

We believe technological research and continuous innovation to be essential for the achievement of rewarding results. First and foremost, our goal is to be a consultant and partner.

discover more
Discover Cefla network
around the world
Skontaktuj się z nami,
aby uzyskać informacje
Szukaj najlepszej dla
Ciebie maszyny