So many ways to cook an egg and
a few good ways to coat a cooking pan

 

One of the requirements we often deal with is the coating of cooking utensils, especially those pots and pans requiring non-stick surface treatments.
This is a process we have looked at and one way to structure it is as follows, even though each customer may have specific needs.

Would you like to have more information?

In that case, our 360° knowledge of surface enhancement technologies allows us to customise a line or a single piece of equipment to account for customer-specific parameters or objectives. Let’s imagine an integrated line offering high volumes of Teflon coating and water or solvent-based coatings.

Normally we would advise a U-shaped layout, the first linear section dedicated to Teflon coating performed on 5 in-line roller coaters such as Smartcoater Pro and relevant ovens, either hot air or using IR lamps.  Each Smartcoater Pro on the outward run will handle a coating (Teflon) volume of 10 g/sqm. After the U-turn, a battery of 5 more such roller coaters can be used to apply a further 10 g/sqm of water or solvent-based coating to the product (still in its flat panel form) followed by the relevant number of ovens. The coated panels would then exit the line via an oven running at 500°C.

Producers of cooking utensils will all have a specific distinctive need. Our process experts will therefore examine the requirement and advise on how to generate efficiency by implementing cost-saving strategies as well as suggesting tailored solutions to reach quality objectives or increased productivity.

Discover more

Smartcoater Pro

Built to process all types of flat surface material, Smartcoater PRO includes key innovations and new design features, all developed to boost efficiency and improve coating quality.

Discover Smartcoater Pro here
Products and Solutions

The search function is now available for complete production lines. All you need to do is select the material involved, the market sector or the finished product. Whichever search criteria is used, a corresponding solution for your spray coating line is obtained in just 3 steps. Search results will indicate the most suitable solution, based on the level of flexibility required, the productivity range and the overall footprint. Solutions are classified as small (S), medium (M) or large (L).

Set up your lines
Products and Solutions

ceflaLab

We believe technological research and continuous innovation to be essential for the achievement of rewarding results. First and foremost, our goal is to be a consultant and partner.

discover more
ceflaLab